Over the last month, I've been preparing my station to operate on digital modes by building a radio to soundcard interface. After various hurdles I finally got the device working and conducted my first on air test yesterday, using PSK31.
Unfortunately it wasn't overly successful. I can only get the radio to output around 10-12W maximum before the ALC kicks in causing horrendous noise on the signal. I also have some interference problems with my keyboard which makes operating difficult. It was originally the case that only a couple of watts of power would cause the keyboard to lock up (and the mouse too after a bit more power). Now I've enclosed my cheap USB hub and slack cable into a metal case to improve shielding. I've also added ferrite beads to the keyboard cable, mouse cable and the USB hub cable. Although it's improved the situation significantly, when the power level gets over about 8w, some keypresses are missed resulting in "wods tped ike is" (words typed like this).
Despite these problems, I did spend a good while calling CQ and had a very brief QSO with Cris, YO5OAW in Romania. We exchanged reports and location information but due to a fading signal and the problems typing I decided not to stop and chat. PSKReporter also showed my signals being received in Portugal and Rome.
Charlie M0PZT did suggest that using a laptop could be the cause of some problems due to its unshielded nature compared to a desktop PC. I think that's quite likely considering the monitor also receives interference which disappeared when testing with a desktop machine.
So before I try another serious attempt, I think I'll replace the laptop. I'll be building a cheap PC which I reckon can be done for less than £140.00 while still being a machine of fairly modern specification (Intel Celeron Dual Core 2.2GHz, 1GB DDR2 667MHz RAM, 80GB SATA HDD, Wireless LAN, onboard Realtek 5.1Ch audio, onboard Intel graphics) with room for expansion should I need it.
No attachments to display
No comments to display
* Cookies are required to submit comments
